I am going to buy that 10 blinking led kit for the power cell but the card (breadboard) is too long, I have never soldered before or wired electronincs but i figured that if i buy that card i should be able to make a smaller version of the same thing by folowwing thier design only scrunching it toghether.


or does somone have a better plan, i need a low cost method to wire up my pack I am working on now.

This is the circuit the kit follows:

http://ourworld.compuserve.com/homepages/Bill_Bowden/page5.htm#4017-2.gif

Just a big note before you go and buy one of these. They do not function in the same way as the Proton Pack does. It goes one light at a time and shuts off.. I've made several of these from the schematics above.

I learned to solider about 7 or 8 years ago when I was putting together some robots. It is not rocket science, all you do it take the iron and the metal and put them together as they are also touching the copper. The molten metal will stick to the copper because of the different charges. (Opposites Attract). Just do that and make liitle beads of the solder.

I guess I'm not good at explaining.

what ones are used in the movie and how do you make them