it`s me again with another question .in the paranorman plans he explains some things about putting the cake pan and the turntable above the spacer , but he says that you have to cut a hole to then put the cyclotron , i dont understand that because that hole is very small and i think the turntable could not fit there . and one more thing can anyone tell me a very easy way to build a spacer cus the paranorman way is fine but a don`t understand the bottom part were you have to cut the small blocks .
i would really appreciate it if anyone respond to me .thank you

Read the plan very very carefully man. The hole in the spacer is for wires to feed through. The spacer is also the hardest part on the pack to make. I must again recomend Foam Core. It's sturdy and very easy to cut with a sharp blade. To give the spacer it hieght just cut out a strip of Card Bord to the desired width, then just glue, tape, or what ever you do(personally i like Liquid Nails). The wooden block are a helper. Just to make points stronger. The wooden block are not absolutly needed. Personally I have not needed the blocks. I hope this helps, and good luck!

Talk to Ken Huegel about buying a real nice spacer you can use on your pack. It runs for about 30 bucks and is resin casted. I am sure you are already aware of Ken's parts.

http://users.nac.net/stantz/ken/costumes/gbparts1/

Aren't you talking about WolverineX? Or does Ken make a spacer now?

Ken doesnt make spacers, thats only wolverineX and Javamonkey. Ken only makes parts like that for his own projects.

I just bought a spacer from Scott, it's awesome! You should get it, it will save you a ton of time! He made it for me with the Cyclotron added to it… it was only $15!